Petroleum Engineering and Geoscience Department

  • Petroleum Engineering.
  • Mineral and Petroleum Resources Engineering.

Petroleum and Natural Gas Processing Engineering Technology

  • Petroleum and Gas processing Engineering
  • Technology

Mechanical Engineering Department

  • Machnical Engineering Technology.

Electrical/Electronic Engineering Department

  • Electrical/Electronic Engineering Technology

Petroleum Marketing and Business Studies Department

  • Petroleum Marketing and Business Studies

Industrial Safety and Environment Technology Department

  • Science Laboratory Technology
  • Industrial Safety and Environmental Technology

Department of Welding Engineering and Offshore Technology

  • Welding and Fabrication Engineering Technology

Computer Science and Information Technology

Computer Science and Information Technology

[stm_multy_separator css=”.vc_custom_1437475130947{margin-bottom: 10px !important;}”]

ENTRY QUALIFICATIONS

Admission will be by choosing Petroleum Training Institute as first choice of Institution in the Joint Admission Matriculation Board (JAMB) examinations, then apply for the Post UTME screening on this site. Applicants must possess the minimum entry qualifications stated below.

PETROLEUM ENGINEERING TECHNOLOGY

  • Mineral and Petroleum Resources Engineering.
  • Petroleum Engineering.
  1. GCE O/Level, WASC or SSCE (WAEC or NECO) with credit passes in five (5) subjects at not more than two sittings, which should include Mathematics, Physics, Chemistry, English Language and any one of the following Science Subjects, Biology, Geography, Agricultural Science, Technical Electricity and Metal Work, Plus at least a pass in English Language or
  2. National Technical Certificate relevant to the Diploma programme of the application with a credit passes in Mathematics, Physics, Chemistry, English Language and any other related subject
  3. National Business and Technical Examination Board (NABTEB) with credit passes in four (5) subjects which include Mathematics, Physics, Chemistry, English Language, Mechanical Engineering Practice or Metal Work and any other Science or Social Science subject plus a pass in English Language. (ND-Mechanical Engineering Programme only).
  4. National Business and Technical Examination Board (NABTEB) with credit passes in five (5) subjects which include Mathematics, Physics, Chemistry, English Language and any two Electrical subjects National Business and Technical Examination Board (NABTEB) with credit passes in five (5) subjects which include Mathematics, English language, Physics, Chemistry and any oe Electrical subject plus at Crdeit pass in English Language

In addition to (i), (ii), and (iii) above, candidate should pass the trade component/subjects relevant to the programme.

 

PETROLEUM MARKETING AND BUSINESS STUDIES TECHNOLOGY (ND)

  1. GCE O/Level, WASC, SSCE (WAEC or NECO) Credit passes in five (5) subject which must include English Language, Mathematics and any two of the following subject such as Economics, Business Methods, Commerce, History, Religious Knowledge, Accounting, Geography, Statistics and Government. At least a pass in Chemistry is compulsory.
  2. National Business Certificate of NABTEB with credit passes in relevant subject. A Credit pass in Chemistry is compulsory.
  3. Successful completion of the one academic year relevant PTI Pre-Diploma programme.

SCIENCE LABORATORY TECHNOLOGY (ND)

  1. GCE O/Level, WASC, SSCE (WAEC or NECO) Credit passes in five (5) subject at not more than two sittings which must include Mathematics, English Language, Chemistry and any two subjects from the following; Physics, Biology, or Agricultural Science, Economics, Geography, Technical Drawing, Wood Work and Metal Work, In addition, candidates must possess at least pass grade in Physics, Biology and English Language.
  2. National Technical Certificate in Chemistry Laboratory Technology/Industrial Safety or
  3. Successful completion of the one academic year relevant PTI Pre-Diploma programme.

WELDING AND FABRICATION ENGINEERING TECHNOLOGY

  1. GCE O/Level, WASC, SSCE (WAEC or NECO) Credit passes in five (5) subject at not more than two sittings which must include Mathematics, English Language, Chemistry, Physics and any one of the following subjects, Technical Drawing, Biology or Agricultural Science, Further Mathematics, Statistics, Basic Electronics, Metal Work Wood Work, Geography, Economics, Plus at least a pass in English Language or
  2. National Technical Certificate (NTC) Examination in Welding and Fabrication Craft Practice with credit passes in Mathematics, Welding Technology, Welding and Fabrication Practices, Technical Drawing or Integrated Science and at least a pass in English Language.
  3. National Business and Technical Examination Board (NABTEB) with credit passes in five (5) subjects which should include Mathematics, English Language, Chemistry and Physics, Welding Practice, and any other Science or Social Science subject
  4. Successful completion of the one academic year relevant PTI Pre-Diploma programme.

Electrical And Electronics Engineering Technology

  1. GCE O/Level, WASC or SSCE (WAEC or NECO) with credit passes in five (5) subjects at not more than two sittings, which should include Mathematics, Physics, Chemistry, English Language and any one of the following Science Subjects, Biology, Geography, Agricultural Science, Technical Electricity and Metal Work, Plus at least a pass in English Language or
  2. National Technical Certificate relevant to the Diploma programme of the application with a credit passes in Mathematics, Physics, Chemistry, English Language and any other related subject
  3. National Business and Technical Examination Board (NABTEB) with credit passes in four (5) subjects which include Mathematics, Physics, Chemistry, English Language, Mechanical Engineering Practice or Metal Work and any other Science or Social Science subject plus a pass in English Language. (ND-Mechanical Engineering Programme only).
  4. National Business and Technical Examination Board (NABTEB) with credit passes in five (5) subjects which include Mathematics, Physics, Chemistry, English Language and any two Electrical subjects National Business and Technical Examination Board (NABTEB) with credit passes in five (5) subjects which include Mathematics, English language, Physics, Chemistry and any oe Electrical subject plus at least a pass in English Language. (ND – Electrical /Electronic Engineering Technology programme only).

In addition to (i), (ii), and (iii) above, candidate should pass the trade component/subjects relevant to the programme.

Mechanical Engineering Technology

  1. GCE O/Level, WASC or SSCE (WAEC or NECO) with credit passes in five (5) subjects at not more than two sittings, which should include Mathematics, Physics, Chemistry, English Language and any one of the following Science Subjects, Biology, Geography, Agricultural Science, Technical Electricity and Metal Work, Plus at least a pass in English Language or
  2. National Technical Certificate relevant to the Diploma programme of the application with a credit passes in Mathematics, Physics, Chemistry, English Language and any other related subject
  3. National Business and Technical Examination Board (NABTEB) with credit passes in four (5) subjects which include Mathematics, Physics, Chemistry, English Language, Mechanical Engineering Practice or Metal Work and any other Science or Social Science subject plus a pass in English Language. (ND-Mechanical Engineering Programme only).
  4. National Business and Technical Examination Board (NABTEB) with credit passes in five (5) subjects which include Mathematics, Physics, Chemistry, English Language and any two Electrical subjects National Business and Technical Examination Board (NABTEB) with credit passes in five (5) subjects which include Mathematics, English language, Physics, Chemistry and any oe Electrical subject plus at least a pass in English Language. (ND – Electrical /Electronic Engineering Technology programme only).

In addition to (i), (ii), and (iii) above, candidate should pass the trade component/subjects relevant to the programme.

Petroleum and Natural Gas Processing Technology

  1. GCE O/Level, WASC, SSCE (WAEC or NECO) Credit passes in five (5) subject at not more than two sittings which must include Mathematics, English Language, Chemistry and any two subjects from the following; Physics, Biology, or Agricultural Science, Economics, Geography, Technical Drawing, Wood Work and Metal Work, In addition, candidates must possess at least pass grade in Physics, Biology and English Language.
  2. National Technical Certificate in Chemistry Laboratory Technology/Industrial Safety or
  3. Successful completion of the one academic year relevant PTI Pre-Diploma programme.

Computer Science and Information Technology

  1. GCE O/Level, WASC or SSCE (WAEC or NECO) with credit passes in five (5) subjects at not more than two sittings, which should include Mathematics, Physics, Chemistry, English Language and any one of the following Science Subjects, Biology, Geography, Agricultural Science, Technical Electricity and Metal Work, Plus at least a pass in English Language or
  2. National Technical Certificate relevant to the Diploma programme of the application with a credit passes in Mathematics, Physics, Chemistry, English Language and any other related subject
  3. National Business and Technical Examination Board (NABTEB) with credit passes in four (5) subjects which include Mathematics, Physics, Chemistry, English Language, Mechanical Engineering Practice or Metal Work and any other Science or Social Science subject plus a pass in English Language. (ND-Mechanical Engineering Programme only).
  4. National Business and Technical Examination Board (NABTEB) with credit passes in five (5) subjects which include Mathematics, Physics, Chemistry, English Language and any two Electrical subjects National Business and Technical Examination Board (NABTEB) with credit passes in five (5) subjects which include Mathematics, English language, Physics, Chemistry and any oe Electrical subject plus at least a pass in English Language. (ND – Electrical /Electronic Engineering Technology programme only).

In addition to (i), (ii), and (iii) above, candidate should pass the trade component/subjects relevant to the programme.

[stm_multy_separator css=”.vc_custom_1437475130947{margin-bottom: 10px !important;}”]

PRINCIPAL OFFICERS

[stm_experts experts_all=”no” expert_slides_per_row=”2″]
Recent Posts
Archives

Our Vision & Mission

Our Vision
To become the leading oil and gas technological institute in Africa.

Our Mission

To provide competent technological manpower through quality training, research, and consultancy for the petroleum and allied industries.

Contact us

Petroleum Training Institute, Nigeria Admissions: 08127667021 IT Support: 08122855018 Enquiries: info@pti.edu.ng

Calendar

May 2021
M T W T F S S
 12
3456789
10111213141516
17181920212223
24252627282930
31  

The PTI Act: 1972 NO 37

An Act to establish the Petroleum Training Institute to provide courses of instruction, training, and research in petroleum technology and to produce technicians and other skilled personnel required to run the petroleum industry.

Copyright © 2021. Powered by DiPTI / ICT Team